Skip to content

Product Tutorial

Tempered Glass & Screen Protector Installation

Make sure to follow the right installation instructions below depending on whether you have purchased a

  1. Snakehive Tempered Glass or
  2. Snakehive Screen Protector

1. Tempered Glass Installation

Before applying your new screen protector, make sure that you amend your touch sensitivity settings on your phone (if possible!) to a higher setting, which will allow your fingerprint/device to read through the tempered glass.

STEP 1.

Clean your screen with the cleaning wipes provided

Step 2

Pull back and remove the protective film from one side of the tempered glass

Step 3.

Align the screen protector over your device using alignment stickers and position it carefully in place

STEP 4.

Clean the glass with the micro fibre cloth, and you're done!

2. Screen Protector Installation

Scroll through to learn how to install your new Hybrid Glass Screen Protector.

Before applying your new screen protector, make sure that you amend your touch sensitivity settings on your phone (if possible!) to a higher setting, which will allow your fingerprint/device to read through the tempered glass.

Step 1.

Make sure you have a clean and flat surface to work on. Like most things in life preparation is key and making sure your phone screen is clean and dust free will ensure you have a great result once your screen protector is in place.

Step 2

Place your phone into the applicator tool

Note. for Google Pixel models, you will need to use the additional locking mechanism to secure your device.

Step 3.

Clean your phone with the alcohol wipe provided

Step 4.

Wipe the screen with the cleaning wipe and dry it with the cloth to ensure it is dry

Step 5

Blot the screen with dust sticker

Step 6.

Peel off the film and align the holes in the screen protector tabs to the notches on the applicator tool (you might want to do a test run aligning the tabs to the notches before you peel off the film)

Step 7.

Stick the screen protector down using the scraper card and remove any bubbles

Step 8.

Carefully peel off the top layer using the screen protector tabs and remove from the applicator bed

Step 9.

Use the scraper card and cloth to push out any remaining bubbles

Step 10.

All done. Get in touch if you have any questions.

 

Claim Your Reward!

Your reward!

Your friend has gifted you a reward
Here is your coupon code
Enter your email address to receive your 15% off discount.